LHR Series - Electric Only Ratings from 6 to 36 kW	PDF File	CES Series - Steam and Electric- 20,000 to 200,000 Btu/hr	PDF File
EHL Series - Electric Only Ratings from 36 to 144 kW	PDF File	PB Series - Steam and Electric- 20,000 to 160,000 Btu/hr	No Drawing Available
General Instructions (PDF)	Download	CCS Series - Steam Only- 20,000 to 200,000 Btu/hr	No Drawing Available
Line Heater Catalogue (PDF)	Download	Quote / Specification Sheet (DOC File)	DOC File

LHR Series - Electric Only

Range 6 to 30 kW

List Number Rating kW Gallons / hr Litres / hr Raised 35oC No. & Rating of Elements (Standard) LHR 01 6 50 / 230 3 @ 2.0 kW LHR 02 9 80 / 360 6 @ 1.5 kW LHR 03 12 100 / 455 6 @ 2.0 kW LHR 04 18 150 / 680 6 @ 3.0 kW LHR 05 24 200 / 910 12 @ 2.0 kW LHR 06 30 300 / 1360 12 @ 2.5 kW LHR 07 36 400 / 1820 12 @ 3.0 kW

General uses include : Small mains for low output burner systems Small factory systems Low cost installations Pumping & Heating Units This range is NOT generally suitable for use with Waste / Recycled Oil - ASK if you wish to use this fluid Special Applications for Water, Chemicals etc, in Stainless Steel

All units have a Watts Rating appropriate to the fluid type used, which for oil is between 4 and 6 W/sq.in. ( 0.6 and 0.9 W/sq.cm.) Standard Working Pressures up to 30 Bar(g)

The outputs shown are the best values obtainable for the particular heater at the stated temperature rise. Other temperature rises may be calculated on a pro-rata basis, i.e.

600 litres/hr @ 6kW load = 15 C rise, so 300 litres/hr @ 6 kW load = 30 C rise

Formula : kW = litres/hr x temp rise (C) / 1464

Standard Equipment : Removable Core type Heating Elements Controlling and Safety Thermostats as appropriate Thermometer Relief Valve Oil Outlet & Oil Return connections to suit Weathertight terminal cover arrangement Cable Entries to suit Mountings to suit application

See Also Control Panels for the above ranges of heaters (On a separate page)

Extra Items are : Multiple stage design, extra thermostat, wiring etc. Delivery UK - usually a nominal charge only. Other Kilowatt loadings available on request

EHL Series - Electric Only

Range 36 to 144 kW

List Number Rating kW Gallons / hr Litres / hr Raised 35oC No. & Rating of Elements (Standard) EHL 11 30 300 / 1360 15 @ 2.0 kW EHL 12 36 400 / 1820 15 @ 2.4 kW EHL 13 48 500 / 2270 15 @ 3.2 kW EHL 14 60 600 / 2730 15 @ 4.0 kW EHL 15 72 700 / 3180 18 @ 4.0 kW EHL 16 84 800 / 3640 18 @ 4.6 kW EHL 17 96 900 / 4090 18 @ 5.3 kW EHL 18 108 1000 / 4550 18 @ 6.0 kW EHL 19 120 1200 / 5460 24 @ 5.0 kW EHL 20 144 1400 / 6364 24 @ 6.0 kW

General uses include : Large ring main systems Quarry applications with Waste / Recycled oil - MUST BE SPECIFIED AS SUCH Power Station applications Pumping & Heating Units Special Applications for Water, Chemicals etc., in Stainless Steel Special configurations available

All units have a Watts Rating appropriate to the fluid type used, which for oil is between 4 and 6 W/sq.in. ( 0.6 and 0.9 W/sq.cm.) Standard Working Pressures up to 30 Bar(g)

Ratings based on Oil Inlet Temperature of 55 C and an Oil Outlet Temperature of 90 C

Standard Equipment : Removable Core type Heating Elements Controlling and Safety Thermostats as appropriate Thermometer Relief Valve Oil Outlet & Oil Return connections to suit Weathertight terminal cover arrangement Cable Entries to suit Mountings to suit application

See Also Control Panels for the above ranges of heaters (On a separate page)

Extra Items : Multiple stage design, extra thermostat, wiring etc. Delivery UK - usually a nominal charge only. Other Kilowatt loadings available on request

Back to Top

CES Series - Steam / Electric

Range 20,000 to 200,000 Btu/hr

List Number Rating kW Gallons / hr Litres / hr Raised 35oC No. & Rating of Elements (Standard) Steam Heating Surface Area (Typical) CES 01 3 50 / 230 1 @ 3.0 kW 10 ft2 / 0.9m2 CES 02 6 100 / 4550 3 @ 1.0 kW 20 ft2/ 1.9m2 CES 03 6 150 / 680 3 @ 2.0 kW 30 ft2 / 2.8m2 CES 04 9 200 / 910 3 @ 3.0 kW 40 ft2 / 3.7m2 CES 05 12 250 / 1140 6 @ 2.0 kW 50 ft2 / 4.6m2 CES 06 15 300 / 1360 6 @ 2.5 kW 60 ft2 / 5.6m2 CES 07 15 350 / 1600 6 @ 2.5 kW 70 ft2 / 6.5m2 CES 08 15 400 / 1820 6 @ 2.5 kW 80 ft2 / 7.4m2 CES 09 18 450 / 2050 9 @ 2.0 kW 90 ft2 / 8.4m2 CES 10 18 500 / 2300 9 @ 2.0 kW 100 ft2 / 9.3m2

General uses include : Small mains for low output burner systems Pumping & Heating Units Small factory systems Low cost installations This range is NOT suitable for use with Waste / Recycled Oil Special Applications for Water, Chemicals etc, in Stainless Steel

Standard Equipment : Removable Core type Heating Elements Controlling and Safety Thermostats as appropriate Thermometer Relief Valve Oil Inlet & Oil Outlet connections to suit Weathertight Terminal Cover arrangement Cable entries to suit Mountings available in a variety of designs - i.e. Vertical, Wall mounted

PB Series - Steam / Electric

List Number Rating kW (50%) Gallons / hr Litres / hr Raised 78oC No. & Rating of Elements (Standard) Steam Heating Surface Area (Typical) PB 01 6 27 / 120 3 @ 2.0 kW 20 ft2 / 1.9m2 PB 02 12 54 / 240 3 @ 4.0 kW 20 ft2 / 1.9m2 PB 03 15 66 / 300 3 @ 5.0 kW 20 ft2 / 1.9m2 PB 04 18 80 / 360 3 @ 6.0 kW 25 ft2 / 2.3m2 PB 05 24 100 / 455 9 @ 2.6 kW 40 ft2 / 3.8m2 PB 06 30 130 / 590 9 @ 3.3 kW 70 ft2 / 3.8m2 PB 07 36 160 / 730 9 @ 4.0 kW 80 ft2 / 6.5m2 PB 08 48 210 / 950 9 @ 5.3 kW 80 ft2 / 7.4m2

General uses include : Package Boiler units Pumping & Heating Units Special Applications for Water, Chemicals etc., in Stainless Steel Special configurations available

Standard Equipment : Removable Core type Heating Elements Controlling and Safety Thermostats as appropriate Thermometer Relief Valve Oil Intlet & Oil Outlet connections to suit Weathertight Terminal Cover arrangement Cable entries to suit Mountings available in a variety of designs - i.e. Vertical, Wall mounted

Extra Items : Spirax Sarco Steam Regulator & Control Valve Steam Trap set, sight glasses etc. Multiple stage design, extra thermostat, wiring etc. Delivery UK - usually a nominal charge only. Other Kilowatt loadings available on request Other Steam Surface Areas available on request

Back to Top

CCS Series - Steam Only

Output Range 20,000 - 200,000 Btu/hr

List Number Gallons / hr Litres / hr Raised 35oC Steam Heating Surface Area (Typical) CCS 01 50 / 230 10 ft2 / 0.9m2 CCS 02 100 / 455 20 ft2 / 1.9m2 CCS 03 66 / 300 30 ft2 / 2.8m2 CCS 04 80 / 360 40 ft2 / 3.8m2 CCS 05 250 / 1140 50 ft2 / 4.6m2 CCS 06 300 / 1360 60 ft2 / 5.6m2 CCS 07 350 / 1600 70 ft2 / 6.5m2 CCS 08 400 / 1820 80 ft2 / 7.4m2 CCS 09 450 / 2050 90 ft2 / 8.4m2 CCS 10 500 / 2300 100 ft2 / 9.3m2

Standard W.P. up to 30 bar with Steam Pressure 14 bar maximum. All units sized using 3.4 bar(g) steam Oil Inlet Temperature : 55oC / Oil Outlet Temperature : 90oC

General uses include : Package Boiler units Pumping & Heating Units Special Applications for Water, Chemicals etc., in Stainless Steel Special configurations available

Standard Equipment : Removable Core type Heating Elements Controlling and Safety Thermostats as appropriate Thermometer Relief Valve Oil Intlet & Oil Outlet connections to suit Weathertight Terminal Cover arrangement Cable entries to suit Mountings available in a variety of designs - i.e. Vertical, Wall mounted

Extra Items : Spirax Sarco Steam Regulator & Control Valve Steam Trap set, sight glasses etc. Multiple stage design, extra thermostat, wiring etc. Delivery UK - usually a nominal charge only. Other Kilowatt loadings available on request Other Steam Surface Areas available on request

(c) AKW 2001-09